Common Rail Tester / Common Rail Injector tester

Item No.: MT. C830

It is used for testing common rail injectors and pumps. The testing data could be settled and shown in the 5.7" creen.

LCD screen display:
number of the testing injuectors
Injuection frequency
Injuection width
Pressure adjustment frequency
Applied pressure for the valves (Pressure and flow valves) switching according to the specifications of the testing pumps

Available quantity injectors: 6pcs
Injection Frequency: 0 - 3000 times/min
Injection Width: 100 - 3000 us
Pressure Range: 0 - 2000 Bar
Frequency of Pressure adjustment: 0 - 3000 Hz
Pressure / Flow Control Valve Frequency Range: 0 - 3000 Hz
Pressure / Flow Control Valve Currency Range: 0 - 4000 Hz
Applied voltage for valve: DC12V / 24V

The system combines two independent modules for pump and injector control
Two LCD screens and two keyboards

Pump operation, input/displays operation commands and rail pressure

Injection operation, input/displays operation commands

Modulated driving signal to ensure the safety of the solenoids of the CR pump and injectors

Adjustable duty cycle for the pump driving signal

Two choices of solenoid drive voltages for CR injectors

80V for Bosch, Denso injectors

12V for Delphi injectors

Two operational modes for injectors

Continuous injection

The frequency and the pulse width of the injector driving signal are user adjustable.

Short circuit protection for the output circuitries of the solenoid driving signals

Including necessary accessories, including cable harnesses, high-pressure steel tubes, low-pressure nylon tubes, fittings, fuel rail assembly, etc.